As per the news, the rendering of the iPhone 13 Pro from insiders and shared the design of this phone from all angles. There have been many rumors about the iPhone 13 series before, among which everyone is more concerned about the smaller bangs.
The latest iPhone 13 Pro rendering confirms this news. It can be seen from the rendering that the iPhone 13 Pro does have smaller bangs compared to the bangs on the iPhone 12 Pro.
Apple successfully reduced the size of the bangs by moving the earpiece above the sensor, and the rest of the design seems to be basically similar to the previous generation.
The upcoming iPhone 13 Pro will retain three rear cameras. The renderings seem to show that the rear camera module of the iPhone 13 Pro is a larger square than the rear camera module on the iPhone 12 Pro.
This may indicate that Apple will utilize a larger camera sensor on the iPhone 13 Pro. The three cameras will be equipped with LED flash and lidar sensors to enhance portrait shooting.
The iPhone 13 Pro will be equipped with a 6.1-inch screen, which is the same as the display of the iPhone 12 Pro, measuring 146.7×71.5×7.6 mm that means it is slightly thicker than the iPhone 12 Pro. The expanded thickness may be due to a larger battery.
Past rumors indicate that the iPhone 13 Pro and iPhone 13 Pro Max will be furnished with 120Hz LTPO displays. All models of the iPhone 13 series are expected to be equipped with an improved wide-angle sensor and up to 1TB of storage space.
(Via)
![](https://www.rprna.com/wp-content/uploads/2023/03/RPRNALogo2023.png)