Download 6th One UI 2.0 beta [ZTA9] for the Galaxy S9 and S9+ [Exynos]

Samsung is now sending the 6th One UI 2.0 beta update to the Galaxy S9 series smartphones. The new One UI 2.0 beta update is now available to download.

Software version:

• Galaxy S9: G960FXXU7ZTA9
• Galaxy S9+: G965FXXU7ZTA9

If you want to download the 6th One UI 2.0 beta update manually, you can do this from the link below.

NOTE: THESE UPDATE.ZIP’s ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!

Download links :

• Download: Galaxy S9
• Download: Galaxy S9+

RENAME THE FILE TO update.zip

Steps to Install One UI 2.0 Beta on the Galaxy S9 and S9+:

After downloading the firmware file, it’s required for you to rename the file as “update.zip”. After downloading and renaming the firmware, you can proceed with the installation process.

1. Download SDK platform-tools from here.
2. Extract the SDK on your desktop.
3. Open the extracted folder and copy the update.zip (firmware).
4. Inside the folder, press and hold the left shift + right-mouse-click and select “open command prompt here” to open it.
5. Now, Turn off your phone.
6. Enter recovery mode by press and holding the Power + Bixby + Volume up buttons altogether for a few seconds.
7. Select “Update via ADB” (You can scroll using volume keys and select using the power button).
8. Connect your phone to the PC via the USB cable.
9. In the command prompt run the following command:  ./adb devices
10. Wait a few seconds while it searches your phone.
11. If your device is found, run the following command: ./adb sideload update.zip
12. The update process will start automatically, it will take some time to complete.
13. Once the process is completed, the phone will boot itself and update the apps and direct you to the home screen.
14. After the installation, Clear your cache by going into recovery (VoIUP – Bixby – Power).

Try with a MicroSD :

– Rename the downloaded .bin file to update.zip
– Copy it to your microSD
– Reboot your phone in recovery mode (Hold power+bixby+volume up buttons while rebooting)
– Select Apply update from SD card
– Navigate and select the previously copied update.zip
– It will start the update and reboot your phone once it finishes

Interested: How to rollback from One UI 2.0 Beta (Android 10) to One UI 1.1 (Android 9)